Discussion Forum - Northstar Chevelle Club

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Dust cover for flexplate and valve cover gasket recomendations


2K+ Club

Status: Offline
Posts: 2413
Date:
Dust cover for flexplate and valve cover gasket recomendations
Permalink  
 


Wondering  if there is a dust cover out there that fits a 2004r trans with a gen 1 SB with the  Delco starter on the passenger side and the 168 tooth flexplate?  Also looking for a gasket that won’t leak.



__________________

Jim L

Lake City



Active Member

Status: Offline
Posts: 417
Date:
Permalink  
 

I just installed a plastic generic inspection cover on the 442. Got it at Summit. You have to cut out for the starter and it is not a perfect fit, but when installed it does the job fine. Only took about 1/2 hour to trim and install.

I found rubber valve cover gaskets a Summit last time I built my motor. Had a steel core and was very rigid. I have one on each side of my valve cover spacers and no leaks, no sealer. 

I don’t have part #’s sorry, you’ll have to do some shopping.



__________________

Chris S.

Oak Grove

'68 Malibu (His)

'68 442 (Hers)



2K+ Club

Status: Offline
Posts: 2413
Date:
Permalink  
 

I have heard that a dust cover for the 85-90 G body V-6 may work.



__________________

Jim L

Lake City

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Chatbox
Please log in to join the chat!